The RugBadger EZ-Tower is one the
easiest pieces of
area rug cleaning
equipment to use.
With
"patent applied for" innovations,
this area rug dry
tower
was designed so that
just one person can:
*
Assemble it in minutes
*
Fit it into any type of
workspace - like a 2-car garage
*
Easily lift 400+ lb soaking wet
rugs 6 feet high
* Use it without motors, pulleys, cables or ropes
Watch
the video to see just how easy it is
to use
Now that
you've watched the video, here
is some additional information
Example of EZ-Tower
Pro setup with a 13' span.
Will easily
hold eight 12' x 13' rugs,
four 5x11 rugs and sixteen
3' x 12' runners! That
equates to well over 2000
square feet of rug drying
hangers with a footprint of
just 6'x13' (please allow up
to 20' in space to operate
with a 13' span)
Adding an
optional wheel truck set up
lets you easily move your
whole load outside for a
"FREE solar dry"
To be able to
keep the cost of the EZ-Tower
down and the shipping
charges rock bottom you will
need to buy the following
materials:
Twelve
2"x4" for poles at the
length that works best
for you. For example, if
you want a 13' span, we
recommend that you have
3' overhang on both ends
for good leverage which
also doubles as bonus
hanging poles for
runners!
Eight
2"x4" poles for the ends
for more bonus hanging
poles. Have these cut at
6.5' and hang your
smaller rugs at the
ends.
One roll
of PVC corrugated
drainage tile. Cut these
about 6" smaller then
your pole with for easy
operation.
